Industrial parks are places of work with high capacity and intensity, accidents can happen at any time if the lighting conditions are not effective, human vision and health will be seriously affected, especially jobs that require high vision, precision and safety will easily cause visual fatigue and discomfort.
Therefore, good lighting needs to pay attention to both quantity and quality, sufficient illuminance when working is essential, parameters of luminous flux, light source color, glare must be adjusted to a reasonable balance to bring a feeling of comfort, safety for health and work efficiency.
Lighting design criteria suitable for factory working environment:
The lighting environment should be designed for visual comfort, where workers feel comfortable, have visual safety, and can easily detect obstacles and hazards when moving.
The main parameters that need to be adjusted to provide a good lighting environment are:
– luminance distribution,
– illuminance,
– glare
– lighting direction
– color of light and illuminated surface
– flicker
– daylight
– maintenance
Operating principle of smart lighting system in factory area:
– Smart LED lighting system with smart sensors can easily detect movement, quickly detect movement and turn on before the object moves to this area. – Smart LED lighting system using light sensors when installed in the factory area will be illuminated by area (by zone) accordingly thanks to the light sensor, this illuminated area will help the forklift run safely
– In addition, the system also uses a motion sensor (When there is no movement, the lighting system will automatically dim (Dim) to 10% lower than the original light level, this is very helpful for saving electricity when there is no one.
– Ability to integrate into the building management system: LED lights can be easily integrated into the building management system for flexible scheduling to optimize the lighting network and save more.
– Control smart lighting by voice directly on the phone or integrate with virtual assistant google assistant, Alexa Amazone.. easily control lighting with just a pre-set command.
– Lighting scenarios are set up and easy to use according to the requirements at the workplace Thanks to the application that is easily installed on smart phones, tablets, laptops… just need an internet connection.
o Scenarios to customize the light according to different illuminances in different areas are measured and meet national lighting standards (TCVN 7114 – 1: 2008)
o Scenarios to adjust light color according to biological rhythms (customize time frames with light colors suitable for human biological rhythms)
o Scenarios to automatically turn on/off (automatically turn on the light when there are people and turn it off when there are no people)
o Scenarios to automatically dim (automatically brighten the light more than the original setting when there are people or reduce the light when there are no people)
Benefits of smart LED lighting solutions in factory areas:
o Ability to save up to 75% of electricity consumption compared to using conventional LED lighting systems. At the same time, LED lights have a much longer lifespan, so the cost of the entire system is significantly reduced, providing a quick payback.
o The smart system uses wifi mesh technology, so the network of access points is unified and can cover the entire area, the data is automatically routed to optimize connection and stability. In addition, when one of the access points encounters a problem, the other points automatically add traffic and take over the location of the faulty access point until it is completely fixed.
o Always ensure absolutely safe lighting when there is human activity.
o Use daylight sensors, automatically dim up or down depending on the amount of natural daylight. The more natural light, the lower the lamp will Dim to neutralize the amount of light, helping to save electricity while maintaining the desired brightness.
o Easily control the lighting system based on the phone app. You can adjust the sensor to turn off if you do not want the light to automatically adjust the light according to the sensor. This helps to keep the amount of light constant when using this lamp for meeting room areas.
o Light control scenarios via the phone app are easy to control and use as desired.
o Wireless lighting system, no wiring required, connection based on sensors, so saving wiring costs.
Why choose our solution?
· LK Engineering is proud to be the leading unit providing Smart Lighting Solutions suitable for all industrial areas, from factories through warehouses to shipping yards, we offer suitable lighting solutions to ensure safety for users.
· Our smart lighting solutions are flexible to each user’s requirements, along with calculating solutions that significantly save energy consumption and operating costs.
· Our solutions comply with all industrial standards and can operate in extremely harsh industrial environments.
· Choosing our solutions, customers will be completely assured because of the good warranty, maintenance and after-sales service.
